Trendy polished concrete flooring will not be solely elegant they’re sturdy and really economical so it’s price contemplating having them put in when constructing or renovating your property or office as a really sensible flooring answer.
Earlier than you possibly can polish concrete flooring they must be stripped again to a clear and sound floor that’s simple to shine. This may be finished by mechanical grinders or with using Chemical substances stripper.
Chemical strippers are both solvent primarily based which normally makes use of methylene chloride, a really sturdy, reactive, flammable oxidizer that requires the person to put on protecting clothes and respirators or biochemical strippers which might be rather more person and environmentally pleasant. These normally take longer and should require repeat purposes to take away some surfaces, however are rather more person and environmentally pleasant. In addition they have the benefit they’re much less messy and could be cleaned up with water.
Step one in stripping your previous ground is to take away all of the previous cement on the floor together with any masking which may be there together with tiles, grout, paint or epoxy.
When deciding which is the most effective technique thought have to be given to the power of the operators, the positioning limitations and what must be eliminated or stripped from the ground.
It’s also essential to contemplate what you need the completed ground to appear to be, is it inside or exterior, how will probably be used and whether or not there are any designs or patterns you want to preserve or blemishes you need to take away.
The very best method to efficient and effectively have your individual polished concrete floors is to do the job in phases. The next steps will aid you do the most effective job with the most effective outcomes.
- Step 1:Sweep the ground completely
Use a brush or vacuum cleaner to take away any dust or particles so the ground is clear.
- Step2: Mop the ground with clear water and a gentle detergent
Moping will take away any gentle stains and in addition decide up any remaining mud so you possibly can correctly examine the ground.
- Step three: Dry the ground and examine it rigorously
You will need to dry the ground correctly after which make a visible inspection of all areas of the ground so you possibly can see if there are any repairs required.
- Step four: Polish the ground utilizing a Coarse (500) Grit cutter polisher
This may successfully take away any cussed stains lose concrete and tough areas.
Begin at one finish and grind/polish the ground systematically back and forth to evenly cowl the entire ground in a round movement. Attempt to keep away from overlapping however pay additional consideration to stains and tough areas.
- Step 5 Polish with fantastic Grit Sprucing Disk
Utilizing a round movement, polish the entire ground, the entire floor ought to look even, clear and uniform with any remaining stains and tough areas eliminated.
- Step 6: Polish with an Further-Wonderful Grit (1500) Sprucing Disk
This step will give your ground a pleasant glass like sheen. Throughout this a part of the sharpening, you must overlap the circles as you go together with a rhythmic round movement over your entire ground.
- Step 7: Apply an Applicable Concrete Flooring Polish
Apply the proper ground polish utilizing the ground grinder to present your ground an extra-long lasting sheen and appropriate ware safety.